Guides

One rule prevents almost every SysDVR update problem: the sysmodule on the console and SysDVR-Client on your computer must be exactly the same version, and the console must reboot after you change the files. The official troubleshooting guide puts it bluntly — version 6.x on the console with a different version of the client simply…

The SysDVR Settings app is the on-console control panel that comes with the full version of SysDVR. It’s where you see whether the sysmodule is running, check which streaming mode is active, and switch modes — no SD card removal, no config files. You’ll find it in the Homebrew Menu after installing the full build…

Out of the box, SysDVR can only stream games that allow the Switch’s native video recording — and some popular games block recording entirely. dvr-patches is the fix: a small set of patches, published by exelix11 — the same author as SysDVR itself, in his own repository — that lifts the recording block for most…

Yes — if your Switch runs custom firmware, you can play on your laptop screen with no capture card at all. SysDVR is a free, open-source sysmodule by exelix11 that streams your gameplay — video and audio together — from the console to the SysDVR-Client app on your laptop, over a USB cable or your…

Simple Network mode is SysDVR’s default, and its simplest idea: the console publishes a standard RTSP video stream on your local network, and any compatible player can open it — no SysDVR-Client app involved. That makes it the only mode that works on devices with no client at all, like iPhones, iPads and smart TVs….

TCP Bridge is the streaming mode the SysDVR author recommends: it sends gameplay over your local network through the SysDVR-Client app, using the client’s own protocol for low latency. On a healthy home network it feels close to USB while leaving you free to play docked or undocked, anywhere in range. This guide enables it…

USB is SysDVR’s lowest-latency streaming mode: gameplay travels over a cable instead of your Wi-Fi, so there’s no network congestion to fight. The setup has three parts — switch the console to USB mode, install the Windows driver once (using the method built into the current client, not Zadig), and connect. Two honest limits before…

Yes, there is an official SysDVR client for Android — it turns a phone or tablet into a wireless monitor for your Switch. But it comes with a warning that matters: since version 6.0 the Android client is distributed only through the project’s GitHub releases. Any “SysDVR” app you find in the Play Store or…

On Linux, SysDVR-Client comes as an official Flatpak package for x64 systems — a two-command install. ARM machines such as the Raspberry Pi take a manual route through the cross-platform .NET build, which is more involved and worth attempting only if you’re comfortable in a terminal. This guide covers both, plus the one USB detail…

SysDVR-Client on macOS needs no installer and no drivers: download the build for your chip, extract it, and launch. The one hurdle most Mac users hit is Gatekeeper — SysDVR is an unsigned app, so macOS may refuse to open it until you allow an exception, and on some machines you may also need to…